مورّد نظام الإيبوكسي المتكامل — الخليج العربي
تورّد ريكيم نظام طلاء الإيبوكسي المتكامل من مصدر واحد — راتنج إيبوكسي سائل، النطاق الكامل من الصلبات (TETA، DETA، بولي أميد، فينالكامين، دوري-أليفاتي, Jeffamine), reactive diluents, accelerators, additives, and solvents. المقر الرئيسي دبي ومكتب الرياض للتوريد على مستوى الخليج.
كيف يتكامل نظام الإيبوكسي
يتطلب نظام الإيبوكسي ثنائي المكونات (2K) مكونات متوافقة. ريكيم توفر كل طبقة من طبقات النظام.
راتنجات الإيبوكسي السائلة
راتنجات إيبوكسي سائلة قائمة على بيسفينول A — المعيار القياسي للطلاء المضاد للتآكل وطلاء الأرضيات والمواد اللاصقة الإنشائية في الخليج. Supplied from دبي والرياض مع وثائق COA وSDS كاملة.
RAYPOXY YR-128 — راتنج إيبوكسي سائل
| Viscosity @ 25°C | 11,000–14,000 mPa·s |
| Colour | ≤1 Gardner |
| Hydrolysable Cl | ≤300 ppm |
| Pack sizes | براميل 240 كغ، IBC، بالجملة |
راتنج إيبوكسي BPA قياسي للبرايمرات المضادة للتآكل وطلاء الأرضيات والمواد اللاصقة وأنظمة العزل المائي في الإمارات والسعودية.
عرض المنتج ←راتنج إيبوكسي مذاب — 75% in Xylene
| Solids content | 75% in xylene |
| Viscosity | 1,500–3,500 mPa·s |
| Application | فرشاة، رولو، رش |
| Pack sizes | 20 kg, 200 kg drums |
مذاب مسبقاً في الزيلين لتسهيل التركيب في أنظمة الطلاء القائمة على المذيبات. Lower viscosity for thin-film applications and primer coats.
عرض المنتج ←أيّ راتنج تختار؟
RAYPOXY YR-128 — عندما تحتاج أقصى مقاومة كيميائية، وأدنى محتوى مذيب، وأعلى سلامة للغشاء. Floor coatings, tank linings, structural.
Solvented Grade — When formulating brush/roller applied primers, decorative epoxy coatings, or need lower application viscosity without reactive diluent.
اسأل فريقنا التقني ←المجموعة الكاملة من المصلّبات
The hardener determines cure speed, flexibility, chemical resistance, and surface finish. Raykem supplies all major hardener chemistries for the GCC epoxy market.
صلبات بولي أميد — سلسلة RAYCURE
Polyamide hardeners offer excellent adhesion, flexibility, and moisture tolerance. The workhorses of the GCC epoxy coating market. Suitable for primers, mid-coats, and general industrial coatings.
Aliphatic & صلّب أمين دوري-أليفاتيs
Fast-curing, high cross-link density. TETA and DETA are low-cost, highly reactive amines used in high-performance industrial coatings, adhesives, and composite systems. Cycloaliphatic amines offer improved UV stability and colour retention.
TETA — Triethylenetetramine
| Amine value | 1,450–1,600 mg KOH/g |
| Viscosity | 20–30 mPa·s @ 25°C |
| Pot life (100g) | 15–25 min @ 25°C |
| Typical ratio | 13 phr with YR-128 |
Fast cure, very high reactivity. Used in industrial flooring, adhesives, and grouts. Skin sensitiser — handle with care. Often used as part of a blend rather than neat.
عرض الجدول الفني ←DETA — Diethylenetriamine
| Amine value | 1,700–1,800 mg KOH/g |
| Viscosity | 5–10 mPa·s @ 25°C |
| Pot life (100g) | 10–20 min @ 25°C |
| Typical ratio | 11 phr with YR-128 |
Very fast cure, lower viscosity than TETA. Used in adhesives, grouts, and casting systems where fast demould is needed. Blush risk in humid GCC conditions.
عرض الجدول الفني ←RAYCURE 238 — Modified Aliphatic Amine
| Pot life | 30–45 min @ 25°C |
| Touch dry | 4–6 hrs @ 25°C |
| Blush resistance | Good |
| Ratio | As per TDS |
Modified adduct — reduced skin irritation vs neat TETA/DETA, better blush resistance. Anti-corrosion primers, floor coatings, marine applications.
عرض الجدول الفني ←IPDA — Cycloaliphatic Amine
| UV resistance | Excellent (non-yellowing) |
| HDT | Up to 110°C |
| Pot life | 45–90 min |
| Application | UV-stable clear coats, topcoats |
IPDA (isophorone diamine) provides excellent UV stability, making it the preferred choice for pigmented and clear epoxy topcoats exposed to المملكة العربية السعودية's intense UV conditions.
عرض الجدول الفني ←Jeffamine D-230 — Polyetheramine
| Amine value | ~450 mg KOH/g |
| Flexibility | Excellent |
| Toughness | High impact resistance |
| Application | Flexible epoxy, adhesives |
Polyether backbone gives exceptional flexibility and toughness. Used to toughen brittle epoxy systems — floor coatings with thermal cycling, adhesives, and composite applications. Available on enquiry.
الاستفسار ←Polyamidoamine Hardener
| Properties | Combines amine reactivity with polyamide flexibility |
| Blush risk | Low |
| Application | Marine primers, tank linings |
Hybrid chemistry — faster cure than polyamide, better flexibility than pure amine. Ideal for marine coatings and tank linings in humid GCC environments.
عرض الجدول الفني ←صلّب فينالكامينs — Marine & High-Humidity
The premium choice for marine, offshore, and below-grade coating systems. Derived from cardanol (cashew nut shell liquid), phenalkamines cure in wet and humid conditions — critical for the GCC coastal and offshore environment.
صلّب فينالكامين — Standard Grade
| Cure temperature | Down to 5°C |
| Humidity cure | Up to 98% RH |
| Pot life | 45–90 min @ 25°C |
| Key application | Marine, offshore, subsea |
Cures in wet conditions, on damp surfaces, and in high humidity. Essential for الإمارات and Saudi coastal infrastructure, offshore platforms, and splash zone coatings.
عرض الجدول الفني ←Phenalkamine — Construction Grade
| Solids | High solids / solvent-free |
| Application | Concrete waterproofing |
| Substrate | Green concrete compatible |
Optimised for construction applications — concrete waterproofing membranes, below-grade tank coatings, and infrastructure protection in المملكة العربية السعودية Vision 2030 projects.
عرض الجدول الفني ←Cycloaliphatic Amine — Construction Grade
| Blush resistance | Excellent |
| كيميائي resistance | Excellent |
| Application | كيميائي-resistant floor coatings |
Low blush risk, excellent chemical resistance. كيميائي plant floors, secondary containment, and food-grade coatings where amine blush contamination is unacceptable.
عرض الجدول الفني ←المخففات التفاعلية والمسرّعات
Reduce viscosity, speed up cure, improve surface wetting — without compromising final film performance.
المذيبات والمخففات
Solvent selection affects viscosity, dry time, film appearance, and VOC compliance. Raykem supplies all key epoxy system solvents from دبي and Riyadh.
Benzyl Alcohol
| Boiling point | 205°C |
| Flash point | 93°C |
| Viscosity | 5.8 mPa·s |
| Purity | ≥99.5% |
Unique dual function — acts as both a solvent AND a co-curing agent with amine hardeners. Plasticises the film, reduces viscosity, and extends pot life. Essential in high-build epoxy systems. Lowers HDT slightly. Use at 5–15% in Part A.
عرض المنتج ←Xylene (Mixed)
| Boiling range | 136–144°C |
| Flash point | 27–32°C |
| Purity | ≥97% aromatics |
| Evaporation rate | Medium |
The most widely used thinner in GCC epoxy primer and anti-corrosion coating systems. Strong solvency, good evaporation rate in Middle East temperatures. Used in solvent-borne primers and mid-coats. Not for use in food-grade or enclosed space applications.
عرض المنتج ←IPA — Isopropyl Alcohol
| Purity | ≥99.5% |
| Flash point | 12°C |
| Specific gravity | 0.784–0.786 |
| Evaporation rate | Fast |
Used for surface cleaning and degreasing prior to epoxy application. Also used as a thinner in some waterborne epoxy systems. Essential for cleaning equipment, removing amine blush from epoxy surfaces before topcoating.
عرض المنتج ←Solvent Selection Guide — GCC Epoxy Systems
Anti-Corrosion Primer
Xylene as primary thinner. Add benzyl alcohol (5–10%) to extend pot life in hot GCC conditions.
Floor Coating (100% Solids)
No solvent — use RD-12 reactive diluent for viscosity reduction. Benzyl alcohol if pot life extension needed.
Marine / Offshore
Limit xylene for enclosed spaces. Use benzyl alcohol where possible. Always check VOC regulations for the vessel or platform specification.
Equipment Cleaning
IPA for amine blush removal and surface prep. Xylene for uncured epoxy equipment cleaning. Never use water on uncured epoxy equipment.
Epoxy System التطبيقات — GCC Market
Recommended system combinations for the most common GCC industrial coating applications.
دليل اختيار المصلّب
Compare all hardener chemistries at a glance to select the right curing agent for your application.
مورّد واحد لنظام الإيبوكسي المتكامل
توريد نظام الإيبوكسي بالكامل من مورّد واحد موثوق في الخليج يُزيل مخاطر التوافق، ويُبسّط التوثيق، ويضمن جودة متسقة بين الدُفعات.
نظام متكامل ومتوافق
All components sourced and tested for compatibility — resin, hardener, diluent, accelerator, solvents.
دبي + Riyadh
Physical offices in both الإمارات and المملكة العربية السعودية for local supply and technical support.
COA + SDS
Certificate of Analysis and Safety Data Sheet supplied with every shipment. SABER documentation for KSA.
Direct Sourcing
Direct from approved manufacturers in China, South Korea, and Europe — competitive pricing.