It offers outstanding adhesion, excellent chemical and heat resistance, low shrinkage on cure, and high electrical resistivity — the preferred choice for protective coatings, civil engineering, flooring systems, and electrical encapsulation across the UAE, Saudi Arabia, and GCC.
Technical specifications
| PARAMETER | SPECIFICATION |
|---|---|
| CAS Number | 25068-38-6 |
| EC Number | 500-033-5 |
| Appearance | Clear, Transparent Liquid |
| Epoxy Equivalent Weight (EEW) | 184 – 188 g/eq |
| Colour (Platinum Cobalt) | ≤ 15 Hazen |
| Inorganic Chlorine | ≤ 5 ppm |
| Hydrolysable Chlorine | ≤ 300 ppm |
| Volatile Matter | ≤ 0.15 % |
| Viscosity @ 25°C | 11,000 – 14,000 mPa·s |
| Specific Gravity @ 20°C | 1.16 g/cm³ |
| Flash Point | > 260°C |
| Boiling Point | > 280°C |
Applications
- Primary resin for epoxy flooring, repair mortars, structural adhesives, and civil engineering applications in UAE and Saudi Arabia
- Potting and encapsulation compound for electrical and electronic components with high insulation resistance
- Base material for anticorrosion coatings, pipeline linings, and offshore protective systems (Arabian Gulf operations)
- Protective coatings for industrial structures, warehouses, and manufacturing facilities across the GCC
- Chemical intermediate for fibre-reinforced composites, casting resins, and industrial tooling
- Adhesive binder for concrete repair, tile bedding, and grouting in construction applications
- Marine coatings and hull protection systems operating in Gulf conditions
Key properties
- Outstanding adhesion to steel, concrete, glass, and wood
- Excellent chemical and solvent resistance when cured
- Low shrinkage on cure — critical for precision applications
- High electrical resistivity for electronics encapsulation
- Compatible with all standard amine, polyamide, and anhydride hardeners
- Standard unmodified bisphenol-A liquid epoxy resin grade (EEW 184–188 g/eq)
- Flash point > 260°C (refer to the SDS for classification and storage requirements)
- High heat resistance in cured systems
Usage and recommendations
Use with RAYCURE series hardeners for optimised cure systems. Typical addition rates depend on hardener AHEW and resin EEW (184–188 g/eq). For flooring applications in UAE summer conditions, use a phenalkamine hardener for humidity tolerance. For anti-corrosion primers, RAYCURE 915 or 925 polyamide hardeners are recommended. RAYCURE RD12 reactive diluent can be used to reduce viscosity for spray applications without affecting cure quality. RAYCURE K54 (DMP-30) can be used as accelerator at low levels.
Packaging
- 240 kg Steel Drums
- 1,000 kg IBC Tanks
- Bulk Tankers (~20 MT)
- Custom Packaging on Request
Storage and shelf life
Store in sealed original containers at 5–35°C, away from direct sunlight and heat sources. In UAE and Saudi Arabia summer conditions (45°C+), temperature-controlled storage is strongly recommended to prevent viscosity increase. Shelf life: 24 months in original sealed containers. Implement FIFO rotation.